OUTCAST 6S goes where it wants, which is anywhere it can express its attitude. OUTCAST 6S is a rebel, designed to break conventions. OUTCAST 6S is a dedicated action machine which will make YOU an RC truck stunt hero.

Designed FAST. With almost endless 6S brushelss power on tap from the ARRMA BLX 185 brushless system, there is nothing holding back the OUTCAST 6S.

OUTCAST 6S is battle ready. Featuring a future styled retro truck bodyshell that sports aggressive bolt-on style over-fenders.

The OUTCAST 6S is primed for multi-surface driving action, no matter how hard the elements fight back. Complete with super-strong steel, lightweight aluminum and rugged composite materials; when you pilot the OUTCAST 6S, you are in charge of a powerful force.

Defy the laws of physics.

OUTCAST 6S performs flips, wheelies and stunts with ease.

The OUTCAST 6S bodyshell is equipped with a roll-cage fitted with sacrificial screws. This protects the roof of the bodyshell from wear when sliding along, upside-down, at 60mph.

Designed to STUNT.

The short wheelbase of the OUTCAST 6S Stunt Truck means it performs wheelies, flips and tricks with ease.

Designed TOUGH. With a 3mm thick anodized aluminum chassis, three full-metal geared differentials, beefy suspension components and steel driveshafts throughout, the OUTCAST 6S is ready for whatever you can throw it at.

OUTCAST 6S boasts a strong composite center body support for added protection when the action gets inverted. High-wall composite dirt guards at the front of the chassis protect the electronics and the center transmission.

Big air, back flips, tricks and stunts. Anything seems possible with the OUTCAST 6S.

Designed to STUNT.

The short wheelbase of the OUTCAST 6S Stunt Truck means it performs wheelies, flips and tricks with ease.

A wheelie bar is integrated into the wing mount. It allows long, high angled wheelies.

A scale rear wing aids high speed stability and adds to the super-cool looks.

The battery tray in the OUTCAST 6S model holds your batteries in TIGHT.

Two hook-and-loop straps, fitted perpendicular to each other, provide a secure fit for your batteries. The secure fit means batteries can be safely mounted side-by-side or one on top of the other.

The battery tray incorporates a balance plug stowage area. Battery balance plugs are held in place with a rubber strap, keeping them away from rotating parts.

Wire routing clips fit to the long hook-and-loop strap and keep battery-to-ESC wires away from rotating parts of the model. The front upper brace of the battery adjusts itself to the height of your battery packs.

The battery tray in the OUTCAST 6S model holds your batteries in TIGHT.

Two hook-and-loop straps, fitted perpendicular to each other, provide a secure fit for your batteries. The secure fit means batteries can be safely mounted side-by-side or one on top of the other.

The battery tray incorporates a balance plug stowage area. Battery balance plugs are held in place with a rubber strap, keeping them away from rotating parts.

Wire routing clips fit to the long hook-and-loop strap and keep battery-to-ESC wires away from rotating parts of the model. The front upper brace of the battery adjusts itself to the height of your battery packs.

Heavy-duty 4mm steel shock shafts take big-hits in their stride and offer amazing durability.

ARRMA design TOUGH.

Strong anodized aluminum parts used where it matters, providing strong, reliable performance.

Get your diffs out fast.

Spend more time blasting and less time wrenching with easy-access diffs.

Maintenance and cleaning is made hassle-free, encouraging you to service your OUTCAST 6S regularly.

dBoots 'Back-Flip' multi-surface tires provide awesome traction allowing you to flip, grip and perform tricks. They are mounted on tough five-spoke wheels.

Updated front and rear composite chassis braces on the OUTCAST 6S offer increased strength and durability.

Material has been added to the servo mount to increase stiffness in this area, sharpening steering feel.

The gearboxes have been beefed-up; strength has been strategically added in key areas for even more durability.

Equipped with three metal-geared differential units, as standard, ARRMA understand the importance of durability and control. Easy-access front and rear diff units will allow you to carry-out maintenance in minutes. This means you spend less time wrenching so you can have more time bashing.

The included BLX185 150A waterproof ESC provides consistent power control and is 6S LiPo ready.

Fitted with reliable XT90 connectors and sporting a built-in cooling fan for reduced heat during intense driving action, the BLX185 ESC has over-voltage protection, and a two-stage LiPo cut off for added cell management.

The fitted 10AWG high-quality wires and 6V BEC unit are combined with a three-mode throttle profile (FWD/REVERSE/BRAKE) to provide the ultimate driving experience.

Recommended battery specification: 5000mAh - 35C minimum - per battery pack

The BLX 2050kV brushless motor provides speed and torque and is perfectly balanced for use with our BLX185 ESC unit.

A beautifully etched black aluminum motor can provides a premium look, whilst a four-pole internal configuration keeps the power supply smooth and consistent.

Gold bullet connectors allow fast and easy wire removal when you need to clean your vehicle.

The aluminum motor can provides increased heat dissipation from the finned body section.

A dual motor shaft flat section provides safe and secure pinion gear fit.

The ADS-15M steering servo benefits from metal gears and is fully waterproof.

To provide fast and consistent steering response, the ADS-15M has 208oz-inch (15kg-cm) of torque at 7.2v.

At 1.6 x 0.8 x 1.5" (41 x 20 x 38mm) in size, this high-power steering servo is compact and highly capable.

The ARRMA radio box is fully waterproof and dustproof. Designed to keep your 2.4Ghz reciever safe, no matter how much dirt and water you blast through.

The TTX300 radio system offers fast and consistent control for your ARRMA vehicle. Using 2.4Ghz technology, your ARRMA vehicle is controlled by a wheel and trigger style radio transmitter.

Ideal for new RC users and experienced bashing fans alike. Adjustable steering and throttle trim will allow you to easily tune your control experience to suit your individual needs.

Ready to run out of the box. The OUTCAST 6S BLX is supplied fully built, with high quality electronics pre-installed.

Just add batteries, a charger and a LiPo charging bag and you are ready to stunt.

A high-quality 2.4Ghz radio transmitter and receiver, wheels and high-performance dBoots tires, waterproof ESC and steering servo are all included, as standard. All you will need is a sense of adventure and an appetite for fun.

Please note: Some ARRMA vehicles are not supplied with a battery or wall charger - Check the Tech Spec button on the vehicle's main kit page for more information.

ARRMA will support your investment for two years. With our impressive limited warranty helping to keep you running for longer.

Visit our Support page to learn more about this great feature.

Fully waterproof ESC, steering servo and radio receiver box are standard. This means that hitting the roughest terrains, in the most extreme conditions, will be no problem. Rain, mud, snow, dirt and anything else you want to bash your way through.

ARRMA waterproof electronics are ready for action.

OUTCAST 6S goes where it wants, which is anywhere it can express its attitude. OUTCAST 6S is a rebel, designed to break conventions. OUTCAST 6S is a dedicated action machine which will make YOU an RC truck stunt hero.