FEATURES:

Chassis: 6061 T6 aluminum, 0.197" (5mm) thick
Roll Cage: One-piece heavy duty polymer construction
Drive: Four wheel, CVD based, 0.31" (8mm) shafts, telescoping rear
splined driveshafts
Engine: Zenoah G320RC 1.9 cu in (31.8cc) gasoline powered
Steering and Brake Servos: TS-555HV 1/4 scale metal gear servos,
694 oz/in torque when powered by 7.4V 2S LiPo, or 555 oz/in w/6V
NiMH pack, one year limited warranty on servos
Front Suspension: Independent
Rear Suspension: Four link solid axle, height adjustable CNC machined
rear trailing arms, torsion levers, 0.18" (4.5mm) diameter sway bar
Shocks Hard anodized oil-filled 38mm MegaShocks with 8mm shafts
Front Shock Tower: CNC machined, 0.31" (8mm) thick
Rear Axle: CNC machined billet solid aluminum
Tires: Kraken ATD (All Terrain Dominator) heavily treaded medium
firmness compound
Wheels: 7.32 x 2.91" (186 x 74mm) ten spoke black composite plastic
24mm hex
Transmission: All steel gears with adjustable slipper clutch, and
supported by two aluminum plates enclosed by a Lexan shroud for
protection from dirt
Differential: All metal gears with heavy duty fiberglass reinforced
nylon housing
Body: Inspired by Shannon Campbell's class 1 Beast
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Warranty: Kraken RC warrants the VEKTA.5 to be free of defects in
material and workmanship. This warranty does not cover damage due
to normal wear and tear, user error of assembly, installation, user
modifications and after-market hop ups used. This warranty is not
transferrable.

ARR Kraken Vekta.5 (KV5) Class 1500 Buggy, Zenoah G320RC 1.9 cu in
(31.8cc), Tires, Wheels, Body, Steering and Throttle Servos

Radio System: 2-3 channel with receiver
Battery: 7.4V 2S LiPo recommended, or 6V NiMH pack
Fuel: Pre-mixed gasoline and 2-cycle oil, 25:1 ratio
Track and maintenance equipment

Length: 34.8" (884mm)
Width: 22.8" (580mm)
Height: 12.6" (320mm)
Wheelbase: 23.9" (608mm)
Ground Clearance: 1.97" (50mm) adjustable to 3.98" (100mm)
Gear Ratio: 1:10.079
Weight: 37.8lbs (17.14kg without motor)
Battery Box Dimensions: 4.7 x 2.0 x 1.9" (120 x 51 x 47.5mm)

For Replacement Ball Bearings use:
Qty. Size Location Kraken Part Number
4 15x28x7mm Fr & R Diff KV3317
2 10x19x7mm Fr Bulkhead KV3314
2 12x24x6mm Fr Spindles KV3315
2 20x32x7mm Fr Spindles KV3318
2 20x32x7mm Rear Spindles KV3318
2 12x24x6mm Rear Spindles KV3315
3 8x22x7mm Transmission KV3319
1 20x32x7mm Transmission KV3318
2 12x28x8mm Transmission KV3316